Rear Seat Delete (reversible) Page 2
Next, I used the rear console (no A/C) forward mounting bolts as an
anchor for a center wood piece to support the sloping section (seat
belts just rotated back, not removed)
Once I marked the centerline and largest width, I took measurements and
laid out the forward section. Here it is, going under the
speakers, over the two angled pieces on the sides and supported by wood
on the bracket that's mounted to the rear console mounting points.
'fraid that's all I've got for now, next step is the rear section, mark
and cut the doors, and then get some carpet.
Home |
Prev
|
Next