>>>>> Sdwmdw  <Sdwmdw@aol.com> writes:

> Hi guys,
> I was wondering if anyone happens to know the most efficient to remove the 
> seat backs of the rear seats (the folding piece) on a 1991?

> Anyone??

> Thanks,

> John Weber
> '91 GT

From: gak@klanderman.net
Sent: Tuesday, July 24, 2001 8:04 PM
To: 928
Subject: [928] Re: Need HELP Removing Rear Seat Seatbacks

The outer bolts are accessed after removing the two screws under the
hatch carpet just behind the seats - this allows that flap of fabric
to come up for access.

For the inner bolts, if you have rear A/C you have to remove the upper
and lower A/C cover first.  Then the inner bolts will be obvious.  If
no rear A/C, don't know...

To remove the rear A/C covers:

  - remove rear plastic grate by removing the horizontal screws from
    the hatch side pointing toward the front of the car. lift up in
    back.  be very careful or you will break the clips.

  - now the front grate just lifts up.  pry carefully.

  - i think two vertical screws which are now exposed hold the upper
    cover down.  remove them and the cover lifts up.

  - four horizontal screws (2 each side) hold the lower cover in.
    remove them and carefully lift up.  it's a very snug fit.

Inner rear seatback bolts can now be removed.

greg
88S4 rear A/C