-----Original Message-----
From: Konrad.Szwab@AlconLabs.com [mailto:Konrad.Szwab@AlconLabs.com]
Sent: Monday, March 10, 2003 10:40 AM
To: 928
Subject: [928] Antilock light ?

Hello,
I have a question I hope someone might answer. On my 86 928 the Antilock
light stays on.
What does that mean and what should I fix ?

Thanks !

Konrad Szwab, EE
Systems Engineer / Network Administrator
Alcon Houston, (713) 295 4329


From: Jim Bailey [jim@928intl.com]
Sent: Monday, March 10, 2003 7:24 PM
To: 928
Subject: [928] RE: Antilock light ?

If the light is illuminated it means the system is NOT WORKING . There are
three relays in the system one on the "fuse board" two mounted directly on
the hydrolic unit unit in the left front fender .To access you remove the
plastic splash shield and the cover . Also each wheel has a sensor which
counts teeth on the axle to measure speed they attach to the wiring harness
at the same plug connector used for the brake pad warning . The sensor is a
microswitch which magnetically opens and closes as each tooth passes by .
Any problem with anyone and the light comes on .

Jim Bailey
928 International
Jim@928intl.com
www.928intl.com
(714)632-9288