From: Kurt Hertel [kurt@zaks.com]
Sent: Tuesday, September 03, 2002 1:00 PM
To: 928
Subject: [928] Re: Chattering Wiper blades

Kevin,
The blades should press against the glass with a good bit of pressure. I
have had moderate success bending the wiper arms in at the top of their flat
edge to increase the " angle of attack" of the blades. You might gain
success by just replacing the arms; whose springs may be tired. This bending
at the top helps blades which chatter on the way up, bend the opposite way
for those that chatter on the return. Sounds as if new arms will cure the
problem.
Kurt Hertel : '89 Anniv. Ed. Carrera: ASE Master, L1: PCA,  Rennlist member
# 000725-2104
http://www.craigautometrics.com/Kurt/Kurt.html