This is a view of the engine compartment with the Buick V6. It is kind of hard to see the engine with the intake ducting. I will have to take some pictures with the ducting.

This is another view of the engine compartment.

This is a view of the bottom of the engine. You can see the engine mounts and the transmission adapter plate.

This is a view of the front trunk. It holds my spare tire, jack, air pump, spare oil, tools, spare cables, and radiator for the Buick V6. As you will see in the next few pictures.

This is a view without all the goodies.

This is a view with half of the support board removed.

This is a view of the radiator. The air is directed in from the 944 Turbo bumper and over the radiator.

This is a view of the bottom. It shows the hole I had to cut out in the front trunk and the Corvette electric cooling fan.

This is a better view of the fan and the hole.

This is a view of the routing of the radiator hoses. I drilled holes throw the rack dust cover.

This is a view of the electrical conduit I used the route the water from the engine to the radiator under the car.